diff --git a/3d_prints/rev1/makeshift_feet/bottom_left.stl b/3d_prints/rev1/makeshift_feet/bottom_left.stl deleted file mode 100644 index 79b55be..0000000 Binary files a/3d_prints/rev1/makeshift_feet/bottom_left.stl and /dev/null differ diff --git a/3d_prints/rev1/makeshift_feet/bottom_right.stl b/3d_prints/rev1/makeshift_feet/bottom_right.stl deleted file mode 100644 index 02fb9bb..0000000 Binary files a/3d_prints/rev1/makeshift_feet/bottom_right.stl and /dev/null differ diff --git a/3d_prints/rev1/makeshift_feet/top_left.stl b/3d_prints/rev1/makeshift_feet/top_left.stl deleted file mode 100644 index 46ffe1e..0000000 Binary files a/3d_prints/rev1/makeshift_feet/top_left.stl and /dev/null differ diff --git a/3d_prints/rev1/makeshift_feet/top_right.stl b/3d_prints/rev1/makeshift_feet/top_right.stl deleted file mode 100644 index e5f6cf8..0000000 Binary files a/3d_prints/rev1/makeshift_feet/top_right.stl and /dev/null differ diff --git a/Makefile b/Makefile deleted file mode 100644 index 67fe937..0000000 --- a/Makefile +++ /dev/null @@ -1,54 +0,0 @@ -# Set QMK_HOME in your environment variables to adjust the path of the firmware -QMK_HOME ?= ${HOME}/qmk_firmware - -# QMK keyboard information (author, keyboard, revision) -QMK_KEYBOARD_AUTHOR := binarydiv -QMK_KEYBOARD_NAME := eepyboard -QMK_KEYBOARD_REV ?= rev1 - -# Directory structure for QMK keyboard files -QMK_KEYBOARD_AUTHOR_DIR := ${QMK_KEYBOARD_AUTHOR} -QMK_KEYBOARD_BASE_DIR := ${QMK_KEYBOARD_AUTHOR}/${QMK_KEYBOARD_NAME} -QMK_KEYBOARD_REV_DIR := ${QMK_KEYBOARD_AUTHOR}/${QMK_KEYBOARD_NAME}/${QMK_KEYBOARD_REV} - -# Keymap to use when compiling QMK firmware -QMK_KEYMAP ?= default - -# Set default make target -.DEFAULT_GOAL := qmk-compile - - -# -- QMK commands - -# Prerequisite: Check if QMK is installed -.PHONY: _qmk-check-firmware-installed -_qmk-check-firmware-installed: - @test -d "${QMK_HOME}" || { \ - echo "QMK firmware not found! (QMK_HOME=${QMK_HOME})"; \ - echo "Please install QMK using 'qmk setup' first or set QMK_HOME in environment."; \ - exit 1; \ - } - -# Create symlink in QMK firmware directory to the keyboard files in qmk_keyboards/ -.PHONY: _qmk-create-symlink -_qmk-create-symlink: _qmk-check-firmware-installed ${QMK_HOME}/keyboards/${QMK_KEYBOARD_BASE_DIR} - -# Only create symlink if it doesn't exist already -${QMK_HOME}/keyboards/${QMK_KEYBOARD_BASE_DIR}: - mkdir -p "${QMK_HOME}/keyboards/${QMK_KEYBOARD_AUTHOR_DIR}" - ln -s "$$(realpath qmk_keyboards/${QMK_KEYBOARD_BASE_DIR})" "${QMK_HOME}/keyboards/${QMK_KEYBOARD_BASE_DIR}" - -# Compile QMK firmware -.PHONY: qmk-compile -qmk-compile: _qmk-create-symlink - qmk compile -kb ${QMK_KEYBOARD_REV_DIR} -km ${QMK_KEYMAP} - -# Compile and flash QMK firmware to keyboard -.PHONY: qmk-flash -qmk-flash: _qmk-create-symlink - qmk flash -kb ${QMK_KEYBOARD_REV_DIR} -km ${QMK_KEYMAP} - -# Run "qmk config" to set this keyboard as the default (to simplify running qmk commands manually) -.PHONY: qmk-activate -qmk-activate: _qmk-create-symlink - qmk config user.keyboard=${QMK_KEYBOARD_REV_DIR} user.keymap=${QMK_KEYMAP} diff --git a/README.md b/README.md index 6af5de2..b7815a2 100644 --- a/README.md +++ b/README.md @@ -2,14 +2,6 @@ Custom ergonomic mechanical keyboard with low-profile (Choc) switches. -## Versions - -- **eepyBoard v1.0: Hardware revision 1** - - Mostly ortholinear layout with 13 columns - - Bottom row: two regular keys + four thumb keys (per side, symmetrical) - - Partial F-key row (Esc, F1-F8) and rotary encoder - - RP2040 controller board in upper right corner - ## Repository structure - `/layouts`: Keyboard layouts created with the [Keyboard Layout Editor](http://www.keyboard-layout-editor.com) @@ -86,30 +78,7 @@ Now you can generate the gerber, drill and map files. ### Compile and flash QMK firmware -To compile the QMK firmware, you first need the `qmk` CLI and a local copy of the QMK firmware. - -1. [Install](https://docs.qmk.fm/#/cli) the `qmk` CLI using your favorite package manager. -2. Run `qmk setup` to clone a local copy of the QMK firmware. (By default in `~/qmk_firmware`, feel free to adjust.) - -The firmware for this keyboard is compiled using the local copy of QMK and the keyboard definitions in `qmk_keyboards` -which are automatically symlinked to your installed QMK firmware directory (defaults to `~/qmk_firmware`, can be -overridden by setting `QMK_HOME` in your environment). A Makefile is provided to simplify compiling and flashing. - -To compile and flash the firmware, run `make qmk-flash`. - -After compiling the firmware, you will be asked to put your keyboard into bootloader mode. This can be done in multiple -ways: - -- Hold the BOOTSEL button on the controller board while pressing the reset button (or while plugging in the cable). -- Hold the Escape key while pressing the reset button / plugging in the cable. -- Press the key combination that is mapped to the `QK_BOOTLOADER` keycode (currently Fn + Right Ctrl). - -The RP2040 uses UF2 as the default bootloader. This bootloader works by emulating a USB storage device that the firmware -file can be copied on. After putting the RP2040 into bootloader mode, you need to mount the USB storage device (doesn't -matter where). For convenience, it is recommended to enable auto-mounting in your system, e.g. using `udiskie`. - -You can also run `make qmk-activate` which will run `qmk config` to set `user.keyboard` and `user.keymap` to this -keyboard. This allows you to use the `qmk` CLI directly without specifying the keyboard and keymap everytime. +TODO: Add this when building the firmware ## Used software diff --git a/kicad/eepyboard.kicad_pcb b/kicad/eepyboard.kicad_pcb index ba68495..bfb8f91 100644 --- a/kicad/eepyboard.kicad_pcb +++ b/kicad/eepyboard.kicad_pcb @@ -133,9 +133,9 @@ (subtractmaskfromsilk no) (outputformat 1) (mirror no) - (drillshape 0) + (drillshape 1) (scaleselection 1) - (outputdirectory "gerber/rev1/") + (outputdirectory "") ) ) (net 0 "") diff --git a/kicad/eepyboard.kicad_pro b/kicad/eepyboard.kicad_pro index d7b41e1..55f5926 100644 --- a/kicad/eepyboard.kicad_pro +++ b/kicad/eepyboard.kicad_pro @@ -1019,7 +1019,7 @@ "gencad": "", "idf": "", "netlist": "", - "plot": "gerber/rev1/", + "plot": "", "pos_files": "", "specctra_dsn": "", "step": "", diff --git a/layouts/eepyboard-v1-0.json b/layouts/eepyboard-v1-0.json deleted file mode 100644 index 43495b8..0000000 --- a/layouts/eepyboard-v1-0.json +++ /dev/null @@ -1,339 +0,0 @@ -[ - { - "name": "eepyBoard v1.0", - "author": "binaryDiv" - }, - [ - { - "t": "#000000\n\n\n#cc00ff\n\n\n\n\n\n#ff0000", - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 0 - ] - }, - "Esc\n\n\nStopRec", - { - "x": 0.25, - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 2 - ] - }, - "F1\n\n\nRecord1\n\n\n\n\n\nMacro1", - "F2\n\n\nRecord2\n\n\n\n\n\nMacro2", - "F3", - "F4", - { - "x": 0.25 - }, - "F5", - "F6", - "F7", - "F8\n\n\n\n\n\n\n\n\nPrtScr", - { - "x": 2, - "c": "#ffffff", - "w": 1.125, - "h": 1.125 - }, - "Vol -/+\n\n\nRGB brightness\n\n\n\n\n\nScroll ↑ ↓" - ], - [ - { - "y": 0.25, - "c": "#cccccc" - }, - "~\n`\n\n\n\n\n\n\n\nEsc", - "!\n1\n\n\n\n\n\n\n\nF1", - "@\n2\n\n\n\n\n\n\n\nF2", - "#\n3\n\n\n\n\n\n\n\nF3", - "$\n4\n\n\n\n\n\n\n\nF4", - "%\n5\n\n\n\n\n\n\n\nF5", - "^\n6\n\n\n\n\n\n\n\nF6", - "&\n7\n\n\n\n\n\n\n\nF7", - "*\n8\n\n\n\n\n\n\n\nF8", - "(\n9\n\n\n\n\n\n\n\nF9", - ")\n0\n\n\n\n\n\n\n\nF10", - "_\n-\n\nRGB mode\n\n\n\n\n\nF11", - "+\n=\n\nRGB toggle\n\n\n\n\n\nF12" - ], - [ - "Tab", - "Q\n\n\n\n\n\n\n\n\nHome", - { - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 0 - ] - }, - "W\n\n\n\n\n\n\n\n\n↑", - { - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 2 - ] - }, - "E\n\n\n\n\n\n\n\n\nEnd", - "R\n\n\n\n\n\n\n\n\nPgUp", - "T", - "Y", - { - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 0 - ] - }, - "U\n\n\n\n\n\n\n\n\n_", - "I\n\n\n\n\n\n\n\n\n=", - "O\n\n\n\n\n\n\n\n\n[", - "P\n\n\n\n\n\n\n\n\n]", - "{\n[\n\nRGB speed -", - "}\n]\n\nRGB speed +" - ], - [ - "Esc", - "A\n\n\n\n\n\n\n\n\n←", - "S\n\n\n\n\n\n\n\n\n↓", - "D\n\n\n\n\n\n\n\n\n→", - { - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 2 - ] - }, - "F\n\n\n\n\n\n\n\n\nPgDn", - "G", - "H", - { - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 0 - ] - }, - "J\n\n\n\n\n\n\n\n\n-", - "K\n\n\n\n\n\n\n\n\n+", - "L\n\n\n\n\n\n\n\n\n{", - ":\n;\n\n\n\n\n\n\n\n}", - "\"\n'", - "|\n\\" - ], - [ - "Shift", - { - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 2 - ] - }, - "Home\n\n\n\n\n\n\n\n\nCtrl ←", - { - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 1 - ] - }, - "Z\n\n\n\n\n\n\n\n\nSelect Word", - { - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 2 - ] - }, - "X\n\n\n\n\n\n\n\n\nCtrl →", - "C\n\n\n\n\n\n\n\n\nEnter", - "V", - "B", - "N", - "M", - "<\n,", - ">\n.", - "?\n/\n\nClear eeprom", - "Shift\n\n\nReboot" - ], - [ - "Ctrl", - "End", - { - "x": 9, - "t": "#cc00ff\n\n\n#cc00ff\n\n\n\n\n\n#ff0000" - }, - "Fn", - { - "t": "#000000\n\n\n#cc00ff\n\n\n\n\n\n#ff0000" - }, - "Ctrl\n\n\nBoot loader" - ], - [ - { - "r": 6, - "rx": 1.5, - "ry": 16, - "y": -10.75, - "x": -0.5 - }, - "Super" - ], - [ - { - "r": 12, - "y": -1, - "x": -0.5, - "t": "#ff0000\n\n\n#cc00ff\n\n\n\n\n\n#ff0000" - }, - "Move" - ], - [ - { - "r": 18, - "y": -1, - "x": -0.5, - "t": "#000000\n\n\n#cc00ff\n\n\n\n\n\n#ff0000" - }, - "Bksp" - ], - [ - { - "r": 24, - "y": -1, - "x": -0.5, - "fa": [ - 2, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 2 - ] - }, - "Space" - ], - [ - { - "r": -24, - "rx": 11.5, - "y": -10.75, - "x": -0.5, - "fa": [ - 0, - 0, - 0, - 1, - 0, - 0, - 0, - 0, - 0, - 2 - ] - }, - "Bksp" - ], - [ - { - "r": -18, - "y": -1, - "x": -0.5 - }, - "Enter" - ], - [ - { - "r": -12, - "y": -1, - "x": -0.5 - }, - "AltGr" - ], - [ - { - "r": -6, - "y": -1, - "x": -0.5 - }, - "Del" - ] -] \ No newline at end of file diff --git a/layouts/keyboard-layout-wip.json b/layouts/keyboard-layout-wip.json new file mode 100644 index 0000000..c55aed2 --- /dev/null +++ b/layouts/keyboard-layout-wip.json @@ -0,0 +1,328 @@ +[ + [ + { + "x": 1, + "t": "#000000\n\n\n\n\n\n\n\n\n#ff0000", + "fa": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 2 + ] + }, + "!\n1\n\n\n\n\n\n\n\nF1", + "@\n2\n\n\n\n\n\n\n\nF2", + "#\n3\n\n\n\n\n\n\n\nF3", + { + "x": 6 + }, + "*\n8\n\n\n\n\n\n\n\nF8", + "(\n9\n\n\n\n\n\n\n\nF9", + ")\n0\n\n\n\n\n\n\n\nF10" + ], + [ + { + "y": -0.75 + }, + "~\n`\n\n\n\n\n\n\n\nEsc", + { + "x": 3 + }, + "$\n4\n\n\n\n\n\n\n\nF4", + { + "x": 4 + }, + "&\n7\n\n\n\n\n\n\n\nF7", + { + "x": 3 + }, + "_\n-\n\n\n\n\n\n\n\nF11" + ], + [ + { + "y": -0.75, + "x": 5 + }, + "%\n5\n\n\n\n\n\n\n\nF5", + { + "x": 2 + }, + "^\n6\n\n\n\n\n\n\n\nF6" + ], + [ + { + "y": -0.5, + "x": 1 + }, + "Q\n\n\n\n\n\n\n\n\nM left", + "W\n\n\n\n\n\n\n\n\nM↑", + "E\n\n\n\n\n\n\n\n\nM right", + { + "x": 6 + }, + "I\n\n\n\n\n\n\n\n\n↑", + { + "t": "#000000\n\n\n#0094ff\n\n\n\n\n\n#ff0000" + }, + "O\n\n\n[\n\n\n\n\n\nEnd", + { + "t": "#000000\n\n\n#0094ff" + }, + "P\n\n\n]" + ], + [ + { + "y": -0.75, + "t": "#000000" + }, + "Tab", + { + "x": 3 + }, + "R", + { + "x": 4, + "t": "#000000\n\n\n\n\n\n\n\n\n#ff0000" + }, + "U\n\n\n\n\n\n\n\n\nHome", + { + "x": 3 + }, + "+\n=\n\n\n\n\n\n\n\nF12" + ], + [ + { + "y": -0.75, + "x": 5, + "t": "#000000" + }, + "T", + { + "x": 2, + "t": "#000000\n\n\n\n\n\n\n\n\n#ff0000" + }, + "Y\n\n\n\n\n\n\n\n\nPgUp" + ], + [ + { + "y": -0.5, + "x": 1 + }, + "A\n\n\n\n\n\n\n\n\nM←", + "S\n\n\n\n\n\n\n\n\nM↓", + "D\n\n\n\n\n\n\n\n\nM→", + { + "x": 6, + "f": 3 + }, + "K\n\n\n\n\n\n\n\n\n↓", + { + "t": "#000000\n\n\n#0094ff\n\n\n\n\n\n#ff0000", + "f": 3 + }, + "L\n\n\n{\n\n\n\n\n\n→", + { + "t": "#000000\n\n\n#0094ff" + }, + ":\n;\n\n}" + ], + [ + { + "y": -0.75, + "t": "#000000" + }, + "Esc (?)", + { + "x": 3 + }, + "F", + { + "x": 4, + "t": "#000000\n\n\n\n\n\n\n\n\n#ff0000", + "f": 3 + }, + "J\n\n\n\n\n\n\n\n\n←", + { + "x": 3, + "t": "#000000\n\n\n#0094ff" + }, + "\"\n'\n\n|" + ], + [ + { + "y": -0.75, + "x": 5, + "t": "#000000" + }, + "G", + { + "x": 2, + "t": "#000000\n\n\n\n\n\n\n\n\n#ff0000", + "f": 3 + }, + "H\n\n\n\n\n\n\n\n\nPgDn" + ], + [ + { + "y": -0.5, + "x": 1, + "f": 3 + }, + "Back\n\n\n\n\n\n\n\n\nDel", + { + "t": "#000000" + }, + "Z", + "X", + { + "x": 6 + }, + "M", + "<\n,", + ">\n." + ], + [ + { + "y": -0.75, + "t": "#002aff\n\n\n\n\n\n\n\n\n#ff0000", + "fa": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 1 + ] + }, + "Shift\n\n\n\n\n\n\n\n\nCaps-Word", + { + "x": 3, + "t": "#000000" + }, + "C", + { + "x": 4 + }, + "N", + { + "x": 3, + "t": "#000000\n\n\n#0094ff" + }, + "?\n/\n\n\\" + ], + [ + { + "y": -0.75, + "x": 5, + "t": "#000000" + }, + "V", + { + "x": 2 + }, + "B" + ], + [ + { + "y": -0.5, + "x": 1, + "t": "#0094ff" + }, + "Raise", + { + "x": 10, + "t": "#cc00ff" + }, + "Fn / kbdctl" + ], + [ + { + "y": -0.75, + "t": "#002aff" + }, + "Ctrl", + { + "x": 12, + "t": "#000000", + "a": 7 + }, + "(?)" + ], + [ + { + "y": -0.75, + "x": 2.5, + "t": "#002aff", + "a": 4 + }, + "Super", + { + "x": 7, + "t": "#009e26" + }, + "Leader ?" + ], + [ + { + "y": -0.75, + "x": 3.5, + "t": "#ff0000" + }, + "Move", + { + "x": 5, + "t": "#0094ff" + }, + "1shot Raise" + ], + [ + { + "y": -0.75, + "x": 4.5, + "t": "#002aff" + }, + "Alt", + { + "x": 3 + }, + "AltGr" + ], + [ + { + "y": -0.75, + "x": 5.5, + "t": "#000000", + "fa": [ + 2 + ] + }, + "Space", + { + "x": 1, + "t": "#000000\n\n\n\n\n\n\n\n\n#ff0000", + "fa": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 2 + ] + }, + "Enter\n\n\n\n\n\n\n\n\nIns (?)" + ] +] \ No newline at end of file diff --git a/qmk_keyboards/binarydiv/eepyboard/rev1/README.md b/qmk_keyboards/binarydiv/eepyboard/rev1/README.md deleted file mode 100644 index 9229a4c..0000000 --- a/qmk_keyboards/binarydiv/eepyboard/rev1/README.md +++ /dev/null @@ -1,3 +0,0 @@ -# eepyBoard v1.0 / rev1 - -This is the firmware for hardware revision 1 of the eepyBoard (v1.0). diff --git a/qmk_keyboards/binarydiv/eepyboard/rev1/config.h b/qmk_keyboards/binarydiv/eepyboard/rev1/config.h deleted file mode 100644 index ecd559c..0000000 --- a/qmk_keyboards/binarydiv/eepyboard/rev1/config.h +++ /dev/null @@ -1,7 +0,0 @@ -// Copyright 2024 binaryDiv (@binaryDiv) -// SPDX-License-Identifier: GPL-2.0-or-later - -#pragma once - -// Lock one-shot keys when tapping them twice -#define ONESHOT_TAP_TOGGLE 2 diff --git a/qmk_keyboards/binarydiv/eepyboard/rev1/info.json b/qmk_keyboards/binarydiv/eepyboard/rev1/info.json deleted file mode 100644 index 55dd2d1..0000000 --- a/qmk_keyboards/binarydiv/eepyboard/rev1/info.json +++ /dev/null @@ -1,213 +0,0 @@ -{ - "keyboard_name": "eepyBoard v1.0", - "maintainer": "binaryDiv", - "manufacturer": "binaryDiv", - "url": "https://git.0xbd.space/binaryDiv/eepyBoard", - "processor": "RP2040", - "bootloader": "rp2040", - "usb": { - "device_version": "1.0.0", - "vid": "0x1337", - "pid": "0xBD32" - }, - "features": { - "bootmagic": true, - "command": false, - "console": true, - "extrakey": true, - "mousekey": true, - "nkro": true, - "rgb_matrix": true - }, - "diode_direction": "COL2ROW", - "matrix_pins": { - "cols": ["GP8", "GP7", "GP6", "GP5", "GP4", "GP3", "GP2", "GP1", "GP0", "GP25", "GP24", "GP23", "GP22"], - "rows": ["GP12", "GP13", "GP14", "GP15", "GP16", "GP17"] - }, - "encoder": { - "rotary": [ - { - "pin_a": "GP10", - "pin_b": "GP11", - "resolution": 4 - } - ] - }, - "layouts": { - "LAYOUT_ortho_6x13": { - "layout": [ - {"matrix": [0, 0], "x": 0, "y": 0}, - {"matrix": [0, 1], "x": 1, "y": 0}, - {"matrix": [0, 2], "x": 2, "y": 0}, - {"matrix": [0, 3], "x": 3, "y": 0}, - {"matrix": [0, 4], "x": 4, "y": 0}, - {"matrix": [0, 5], "x": 5, "y": 0}, - {"matrix": [0, 6], "x": 6, "y": 0}, - {"matrix": [0, 7], "x": 7, "y": 0}, - {"matrix": [0, 8], "x": 8, "y": 0}, - {"matrix": [0, 9], "x": 9, "y": 0}, - {"matrix": [0, 10], "x": 10, "y": 0}, - {"matrix": [0, 11], "x": 11, "y": 0}, - {"matrix": [0, 12], "x": 12, "y": 0}, - {"matrix": [1, 0], "x": 0, "y": 1}, - {"matrix": [1, 1], "x": 1, "y": 1}, - {"matrix": [1, 2], "x": 2, "y": 1}, - {"matrix": [1, 3], "x": 3, "y": 1}, - {"matrix": [1, 4], "x": 4, "y": 1}, - {"matrix": [1, 5], "x": 5, "y": 1}, - {"matrix": [1, 6], "x": 6, "y": 1}, - {"matrix": [1, 7], "x": 7, "y": 1}, - {"matrix": [1, 8], "x": 8, "y": 1}, - {"matrix": [1, 9], "x": 9, "y": 1}, - {"matrix": [1, 10], "x": 10, "y": 1}, - {"matrix": [1, 11], "x": 11, "y": 1}, - {"matrix": [1, 12], "x": 12, "y": 1}, - {"matrix": [2, 0], "x": 0, "y": 2}, - {"matrix": [2, 1], "x": 1, "y": 2}, - {"matrix": [2, 2], "x": 2, "y": 2}, - {"matrix": [2, 3], "x": 3, "y": 2}, - {"matrix": [2, 4], "x": 4, "y": 2}, - {"matrix": [2, 5], "x": 5, "y": 2}, - {"matrix": [2, 6], "x": 6, "y": 2}, - {"matrix": [2, 7], "x": 7, "y": 2}, - {"matrix": [2, 8], "x": 8, "y": 2}, - {"matrix": [2, 9], "x": 9, "y": 2}, - {"matrix": [2, 10], "x": 10, "y": 2}, - {"matrix": [2, 11], "x": 11, "y": 2}, - {"matrix": [2, 12], "x": 12, "y": 2}, - {"matrix": [3, 0], "x": 0, "y": 3}, - {"matrix": [3, 1], "x": 1, "y": 3}, - {"matrix": [3, 2], "x": 2, "y": 3}, - {"matrix": [3, 3], "x": 3, "y": 3}, - {"matrix": [3, 4], "x": 4, "y": 3}, - {"matrix": [3, 5], "x": 5, "y": 3}, - {"matrix": [3, 6], "x": 6, "y": 3}, - {"matrix": [3, 7], "x": 7, "y": 3}, - {"matrix": [3, 8], "x": 8, "y": 3}, - {"matrix": [3, 9], "x": 9, "y": 3}, - {"matrix": [3, 10], "x": 10, "y": 3}, - {"matrix": [3, 11], "x": 11, "y": 3}, - {"matrix": [3, 12], "x": 12, "y": 3}, - {"matrix": [4, 0], "x": 0, "y": 4}, - {"matrix": [4, 1], "x": 1, "y": 4}, - {"matrix": [4, 2], "x": 2, "y": 4}, - {"matrix": [4, 3], "x": 3, "y": 4}, - {"matrix": [4, 4], "x": 4, "y": 4}, - {"matrix": [4, 5], "x": 5, "y": 4}, - {"matrix": [4, 6], "x": 6, "y": 4}, - {"matrix": [4, 7], "x": 7, "y": 4}, - {"matrix": [4, 8], "x": 8, "y": 4}, - {"matrix": [4, 9], "x": 9, "y": 4}, - {"matrix": [4, 10], "x": 10, "y": 4}, - {"matrix": [4, 11], "x": 11, "y": 4}, - {"matrix": [4, 12], "x": 12, "y": 4}, - {"matrix": [5, 0], "x": 0, "y": 5}, - {"matrix": [5, 1], "x": 1, "y": 5}, - {"matrix": [5, 2], "x": 2, "y": 5}, - {"matrix": [5, 3], "x": 3, "y": 5}, - {"matrix": [5, 4], "x": 4, "y": 5}, - {"matrix": [5, 5], "x": 5, "y": 5}, - {"matrix": [5, 6], "x": 6, "y": 5}, - {"matrix": [5, 7], "x": 7, "y": 5}, - {"matrix": [5, 8], "x": 8, "y": 5}, - {"matrix": [5, 9], "x": 9, "y": 5}, - {"matrix": [5, 10], "x": 10, "y": 5}, - {"matrix": [5, 11], "x": 11, "y": 5}, - {"matrix": [5, 12], "x": 12, "y": 5} - ] - } - }, - "rgb_matrix": { - "driver": "ws2812", - "default": { - "animation": "cycle_pinwheel", - "speed": 32 - }, - "animations": { - "cycle_pinwheel": true, - "typing_heatmap": true - }, - "max_brightness": 127, - "sleep": true, - "center_point": [6, 3], - "layout": [ - {"x": 10, "y": 0, "flags": 8}, - {"x": 8, "y": 0, "matrix": [0, 8], "flags": 4}, - {"x": 7, "y": 0, "matrix": [0, 7], "flags": 4}, - {"x": 6, "y": 0, "matrix": [0, 6], "flags": 4}, - {"x": 5, "y": 0, "matrix": [0, 5], "flags": 4}, - {"x": 4, "y": 0, "matrix": [0, 4], "flags": 4}, - {"x": 3, "y": 0, "matrix": [0, 3], "flags": 4}, - {"x": 2, "y": 0, "matrix": [0, 2], "flags": 4}, - {"x": 1, "y": 0, "matrix": [0, 1], "flags": 4}, - {"x": 0, "y": 0, "matrix": [0, 0], "flags": 4}, - {"x": 0, "y": 1, "matrix": [1, 0], "flags": 4}, - {"x": 1, "y": 1, "matrix": [1, 1], "flags": 4}, - {"x": 2, "y": 1, "matrix": [1, 2], "flags": 4}, - {"x": 3, "y": 1, "matrix": [1, 3], "flags": 4}, - {"x": 4, "y": 1, "matrix": [1, 4], "flags": 4}, - {"x": 5, "y": 1, "matrix": [1, 5], "flags": 4}, - {"x": 6, "y": 1, "matrix": [1, 6], "flags": 4}, - {"x": 7, "y": 1, "matrix": [1, 7], "flags": 4}, - {"x": 8, "y": 1, "matrix": [1, 8], "flags": 4}, - {"x": 9, "y": 1, "matrix": [1, 9], "flags": 4}, - {"x": 10, "y": 1, "matrix": [1, 10], "flags": 4}, - {"x": 11, "y": 1, "matrix": [1, 11], "flags": 4}, - {"x": 12, "y": 1, "matrix": [1, 12], "flags": 4}, - {"x": 12, "y": 2, "matrix": [2, 12], "flags": 4}, - {"x": 11, "y": 2, "matrix": [2, 11], "flags": 4}, - {"x": 10, "y": 2, "matrix": [2, 10], "flags": 4}, - {"x": 9, "y": 2, "matrix": [2, 9], "flags": 4}, - {"x": 8, "y": 2, "matrix": [2, 8], "flags": 4}, - {"x": 7, "y": 2, "matrix": [2, 7], "flags": 4}, - {"x": 6, "y": 2, "matrix": [2, 6], "flags": 4}, - {"x": 5, "y": 2, "matrix": [2, 5], "flags": 4}, - {"x": 4, "y": 2, "matrix": [2, 4], "flags": 4}, - {"x": 3, "y": 2, "matrix": [2, 3], "flags": 4}, - {"x": 2, "y": 2, "matrix": [2, 2], "flags": 4}, - {"x": 1, "y": 2, "matrix": [2, 1], "flags": 4}, - {"x": 0, "y": 2, "matrix": [2, 0], "flags": 4}, - {"x": 0, "y": 3, "matrix": [3, 0], "flags": 4}, - {"x": 1, "y": 3, "matrix": [3, 1], "flags": 4}, - {"x": 2, "y": 3, "matrix": [3, 2], "flags": 4}, - {"x": 3, "y": 3, "matrix": [3, 3], "flags": 4}, - {"x": 4, "y": 3, "matrix": [3, 4], "flags": 4}, - {"x": 5, "y": 3, "matrix": [3, 5], "flags": 4}, - {"x": 6, "y": 3, "matrix": [3, 6], "flags": 4}, - {"x": 7, "y": 3, "matrix": [3, 7], "flags": 4}, - {"x": 8, "y": 3, "matrix": [3, 8], "flags": 4}, - {"x": 9, "y": 3, "matrix": [3, 9], "flags": 4}, - {"x": 10, "y": 3, "matrix": [3, 10], "flags": 4}, - {"x": 11, "y": 3, "matrix": [3, 11], "flags": 4}, - {"x": 12, "y": 3, "matrix": [3, 12], "flags": 4}, - {"x": 12, "y": 4, "matrix": [4, 12], "flags": 4}, - {"x": 11, "y": 4, "matrix": [4, 11], "flags": 4}, - {"x": 10, "y": 4, "matrix": [4, 10], "flags": 4}, - {"x": 9, "y": 4, "matrix": [4, 9], "flags": 4}, - {"x": 8, "y": 4, "matrix": [4, 8], "flags": 4}, - {"x": 7, "y": 4, "matrix": [4, 7], "flags": 4}, - {"x": 6, "y": 4, "matrix": [4, 6], "flags": 4}, - {"x": 5, "y": 4, "matrix": [4, 5], "flags": 4}, - {"x": 4, "y": 4, "matrix": [4, 4], "flags": 4}, - {"x": 3, "y": 4, "matrix": [4, 3], "flags": 4}, - {"x": 2, "y": 4, "matrix": [4, 2], "flags": 4}, - {"x": 1, "y": 4, "matrix": [4, 1], "flags": 4}, - {"x": 0, "y": 4, "matrix": [4, 0], "flags": 4}, - {"x": 0, "y": 5, "matrix": [5, 0], "flags": 4}, - {"x": 1, "y": 5, "matrix": [5, 1], "flags": 4}, - {"x": 2, "y": 5, "matrix": [5, 2], "flags": 4}, - {"x": 3, "y": 5, "matrix": [5, 3], "flags": 4}, - {"x": 4, "y": 5, "matrix": [5, 4], "flags": 4}, - {"x": 5, "y": 5, "matrix": [5, 5], "flags": 4}, - {"x": 7, "y": 5, "matrix": [5, 7], "flags": 4}, - {"x": 8, "y": 5, "matrix": [5, 8], "flags": 4}, - {"x": 9, "y": 5, "matrix": [5, 9], "flags": 4}, - {"x": 10, "y": 5, "matrix": [5, 10], "flags": 4}, - {"x": 11, "y": 5, "matrix": [5, 11], "flags": 4}, - {"x": 12, "y": 5, "matrix": [5, 12], "flags": 4} - ] - }, - "ws2812": { - "pin": "GP9" - } -} diff --git a/qmk_keyboards/binarydiv/eepyboard/rev1/keymaps/default/keymap.c b/qmk_keyboards/binarydiv/eepyboard/rev1/keymaps/default/keymap.c deleted file mode 100644 index 5c1e5fa..0000000 --- a/qmk_keyboards/binarydiv/eepyboard/rev1/keymaps/default/keymap.c +++ /dev/null @@ -1,85 +0,0 @@ -// Copyright 2024 binaryDiv (@binaryDiv) -// SPDX-License-Identifier: GPL-2.0-or-later - -#include QMK_KEYBOARD_H - -// Define layer names for better readability -enum layer_names { - // Base layer - L_BASE, - - // "Code" key: Moving the cursor around via WASD, F-keys on number keys, etc. - L_CODE, - - // Fn / keyboard control layer: Used for keyboard configuration - L_FN, -}; - -// Custom keycodes -enum custom_keycodes { - // Macro to select the current word (Ctrl-Left, Shift-Ctrl-Right) - MACRO_SELECT_WORD = SAFE_RANGE, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - // Base layer - [L_BASE] = LAYOUT_ortho_6x13( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, _______, _______, _______, KC_KB_MUTE, - KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LEFT_BRACKET, KC_RIGHT_BRACKET, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SEMICOLON, KC_QUOTE, KC_BACKSLASH, - KC_LEFT_SHIFT, KC_HOME, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RIGHT_SHIFT, - KC_LEFT_CTRL, KC_END, KC_LGUI, KC_LEFT_ALT, OSL(L_CODE), KC_SPACE, _______, KC_BACKSPACE, KC_ENTER, OSM(MOD_RALT), KC_DELETE, MO(L_FN), KC_RIGHT_CTRL - ), - - // "Code" key layer - [L_CODE] = LAYOUT_ortho_6x13( - _______, DM_PLY1, DM_PLY2, _______, _______, _______, _______, _______, KC_PRINT_SCREEN, _______, _______, _______, _______, - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, KC_UNDERSCORE, KC_EQUAL, KC_LEFT_BRACKET, KC_RIGHT_BRACKET, _______, _______, - _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, _______, _______, KC_MINUS, KC_PLUS, KC_LEFT_CURLY_BRACE, KC_RIGHT_CURLY_BRACE, _______, _______, - _______, LCTL(KC_LEFT), MACRO_SELECT_WORD, LCTL(KC_RIGHT), KC_ENTER, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - // "Fn" key layer - [L_FN] = LAYOUT_ortho_6x13( - DM_RSTP, DM_REC1, DM_REC2, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, OS_TOGG, _______, RGB_MOD, RGB_TOG, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPD, RGB_SPI, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_CLEAR_EEPROM, QK_REBOOT, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOTLOADER - ) -}; - -// Define mapping for rotary encoder -#if defined(ENCODER_MAP_ENABLE) -const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { - // Base layer: Volume control - [L_BASE] = { - ENCODER_CCW_CW(KC_KB_VOLUME_DOWN, KC_KB_VOLUME_UP) - }, - // Code layer: Scroll wheel - [L_CODE] = { - ENCODER_CCW_CW(KC_MS_WH_UP, KC_MS_WH_DOWN) - }, - // Fn layer: RGB LED brightness control - [L_FN] = { - ENCODER_CCW_CW(RGB_VAD, RGB_VAI) - } -}; -#endif - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case MACRO_SELECT_WORD: - // Run macro when keycode is pressed - if (record->event.pressed) { - // Select word - SEND_STRING(SS_LCTL(SS_TAP(X_LEFT)) SS_LSFT(SS_LCTL(SS_TAP(X_RIGHT)))); - } - break; - } - return true; -} diff --git a/qmk_keyboards/binarydiv/eepyboard/rev1/rules.mk b/qmk_keyboards/binarydiv/eepyboard/rev1/rules.mk deleted file mode 100644 index 2c841ca..0000000 --- a/qmk_keyboards/binarydiv/eepyboard/rev1/rules.mk +++ /dev/null @@ -1,9 +0,0 @@ -# Enable support for rotary encoder -ENCODER_ENABLE = yes -ENCODER_MAP_ENABLE = yes - -# Use RP2040-specific driver for WS2812 (PIO-based) -WS2812_DRIVER = vendor - -# Enable support for dynamic macros -DYNAMIC_MACRO_ENABLE = yes